Multi-axis servo hydraulic press (One Shot Forming Press)【MMF-M】
MMF-1000 ton press for a trial of our factory.
Developed in cooperation with HATANO SEIMITSU CORPORATION
| 【Main specifications of theＯne-shot forming press.】 | ||||
|---|---|---|---|---|
| Form | MMF1000-M33 8axis |
MMF500-M32 5axis |
MMF200-M32 5axis |
|
| Output | （kN） | 10000 | 5000 | 2000 |
| Open height | （mm） | 1400 | 1400 | 1000 |
| No-load speed | （mm/S） | 150 | 150 | 150 |
| Maximum stroke length | （mm） | 600 | 500 | 450 |
| Diameter of main cylinder | （mm） | φ850 | φ620 | φ340 |
| The total power | （kW） | 560 | 320 | 120 |
- Type ofＯne-shot forming press
- MMF（Output ton）─ M（Upper axis number）（Lower axis number）
Feature
- Enables the cost reduction due to high-mix low-volume production.
- One-shot process from transfer or progressive processing.
- Promote compact equipment and in lining.
- Has deployed a system to manage data molding. Each axis position, monitoring the pressure waveform data, even small changes can be confirmed for each axis at the time of molding.
- According to a Customer’s use, combination change of an axis and servo control system software change are possible.
Installation of a trial press
- Output 10,000kN 8 axis hydraulic servo press,
Output 2,000kN 5 axis hydraulic servo press,
We are located at the headquarters as a trial press.
Output 2,000kN 5 axis hydraulic servo press,
We are located at the headquarters as a trial press.
